Category: Product

Vicat Softening Point Test Apparatus

Backed by a team of highly skilled engineers, Kant Plastology engaged in providing a wide range of VICAT SOFTENING POINT APPARATUS. The compact and elegant look of apparatus contains high efficient S.S. 304 tubular heating system for appropriate rate of rise of heat and stirrer motor to create uniform heating in test chamber. The offered apparatus has highly precise temperature control through micro processor based double display digital PID controller. Kant Plastology procures accurate weight, rigid test assembly, test needle & calibrated Dial gauge to conduct the test.

Specification

MODEL (K-VSP-01)
Test station Single test station for VSP test
System status Digital
Temperature controller Micro processor based double display digital PID controller
Heating Through high efficient stainless steel tubular heating system
Temperature range Ambient to 200°C
Temperature least count 0.1°C
Temperature accuracy ± 0.5°C or better
Temperature ramp Selectable (50°C/Hr or 120°C/Hr)
Oil circulation Continuous stirring through stirrer motor
Insulation 50mm thick cera-wool insulation
Specimen thickness 3mm to 13mm
Displacement sensing Through dial gauge of reputed make along with magnetic stand
Displacement range 0.00mm to 10.00mm
Displacement accuracy 0.01mm
Mat. of construction Inner chamber: Polished S. S. 304
Outer chamber: CRC sheet with dual side powder coated
Power supply 230V AC, Single phase, 50Hz

Hot Oil Bath

HOT OIL BATH is widely used for reversion test of uPVC pipe in Plastic industry. Kant Plastology is catered extensive range of HOT OIL BATH with sturdy construction. The heating reaches very fast due to energy efficient heating element equally distributed in the entire chamber and minimum heating loss due to proper heat insulation. The Stirrer motor of calculative RPM produces the homogeneous heating chamber and quite simple test sample hanging attachment to conduct the test for easy operation.

Specification

MODEL (K-HOB-01)
Inner chamber dimension Length 90cm x Width 30cm x Height 35cm
System status Digital
Temperature controller Micro processor based double display digital PID controller
Heating Through high efficient stainless steel tubular heating system
Oil circulation Continuous stirring through stirrer motor of reputed make
Temperature range Up to 180°C
Resolution 0.1°C
Accuracy ± 0.5°C or better
Insulation 50mm thick cera-wool insulation
Mat. of construction Inner chamber: Polished S.S. 304
Outer chamber: CRC sheet with dual side powder coated
Power supply 440V AC, Three phase, 50Hz

Cooling Chamber (Deep Freezer)

COOLING CHAMBER (CONDITIONING CHAMBER) is specially used for particular conditioning of the test specimen at 0°C or low temperature before conducting the test. Usaully this machine apply to condition the test specimen for Impact test of uPVC Pipe. Kant Plastology is engaged to supplying the extensive range of COOLING CHAMBER (DEEP FREEZER) with its prowess and accomplished engineering team. The proffer apparatus is design with good aesthetic, energy efficient and calculated cooling system with minimum cooling loss due to P.U.F. insulation and exactitude temperature control. Its internal Stainless Steel body procures the rust free usage of equipment. The utilization of apparatus is very user friendly.

Specification

MODEL (K-CCh-01)
Type Top opening type, single partition,hydraulic type door
System status Digital
Internal chamber size Length 45cm x Width 45cm x Depth 45cm
Temperature controller Micro processor based double display PID controller
Temperature range Ambient to -5.0°C
Temperature resolution 0.1°C
Accuracy ±0.5°C or better
Cooling Through specially designed high efficient cooling mechanism
Insulation 50mm thick P.U.F. insulation to minimize the cooling loses
Internal chamber Polished S.S. 304 with matt finish
Outer chamber Powder coated G.I sheet
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Humidity Chamber
(Conditioning Chamber)

Kant Plastology feels immensely pleased to offer an advance testing machine as HUMIDITY CHAMBER (CONDITIONING CHAMBER). The offered equipment is constructing by utilizing best quality of raw material and advanced technology by our well skilled engineers. The equipment has Internal Stainless Steel body which procures the rust free usage of equipment. The equipment has advance instruments for exactitude control on Temperature and Relative Humidity, 75mm thick P.U.F. insulation minimize the cooling loss and maintain the temperature of internal chamber. The equipment is designed with user friendly features that make it ease in operation.

Specification

MODEL (K-HC-01)
Internal chamber size Width 45cm x Depth 45cm x Height 45cm
System status Digital
Temperature controller Micro processor based double display PID controller
Temperature range Ambient to 50°C
Temperature resolution 0.1°C
Accuracy ±0.5°C or better
Timer Double display digital timer with buzzer output at set time as optional
Time range Up to 999.9 sec./minute
Cooling Through specially designed high efficient cooling mechanism
Air circulation Through blower fitted at the back side
Humidity range 40% Rh to 90% Rh
Humidity least count 1%
Humidity accuracy +/- 5% or better
Insulation 75mm thick P.U.F. insulation to minimize the heating-cooling loses
Internal chamber Made from polished S.S. 304
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Dart Impact Testing Machine
(For Films & Sheets)

DART IMPACT TESTING MACHINE is generally used to check impact strength of Plastic sheet and Films which are extensively used for packaging industries. Kant Plastology is serving this machine with robust construction and very operational ease mechanical fixtures. The offered apparatus determine the exact test result because of its perfect sample clamping attachment and friction free falling of Dart with dead weights release through magnet. The ease in operation and less maintenance are the key features of the machine.

Specification

MODEL (K-DIT-01)
Falling Height 66cm, 152cm
Height Adjustment Manually
Height Adjustment resolution ± 2mm
Striker (Dart / Dead weight) Dart is made from aluminum
Striker (Dart / Dead weight) 5 dead-weight of 5.0 gmf & 24 dead weight of 15.0 gmf Or 2 dead weight of 0.10 kgf,0.20 kgf,0.30 kgf,0.50 kgf and single dead weight of 1.00 kgf
Striker (Dart) release device Through D. C. magnet
Maximum thickness of Test sample Test up to 100 micron films made from LDPE/HDPE/LLDPE/HMHDPE
Sample Clamping On circular clamps with vacuum pump or specially designed for up to 500micron thick geo-membrane laminated fabric made from HDPE material
Vacuum pump ½ HP vacuum pump creating vacuum up to 560Hg
Vacuum control Through throttle valve available at panel
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Tear Strength Tester

After many years of industry experience and profound market understanding Kant Plastology offer awide gamut of TEAR STRENGTH TESTER. In order to procure excellence range, these testers are manufacturing by well skilled and experienced professionals. Kant Plastology offered ‘Elmendorf type’ machine with aesthetic look and rigid construction.

Specification

MODEL (K-TST-01)
Reference standards ASTM – 1922
Type ‘Elmendorf type’ model
Pendulum weight 1600gmf
Augment weight 3200gmf & 6400gmf
Scale 100% of dead weight fixed on pendulum
Reading accuracy 1% of FSD or better
Material of construction All major parts are of brass material with hard-chrome plating finish
Structure Heavy structure for stability and also provided with level bolts

Emission Flow Variation Test Apparatus
(For Emitters / Emitting Pipe)

EMISSION FLOW VARIATION TEST APPARATUS is widely used to determine the Emission flow rate of Emitters and Emitting pipe. Kant Plastology feel immensely pleased to offer an exclusive gamut of EMISSION FLOW VARIATION TEST APPARATUS. This apparatus is manufactured by utilizing optimum quality raw material and advance technology by our adroit professionals. The apparatus has precise pressure control on fluid passes through test sample. This apparatus reduce the time and human effort due to common test sample adaptor for 12mm, 16mm & 20mm Emitting Pipe and easy tray sliding arrangement to measure the exact emission flow. Digital timer with auto pump-off function at set time feature is help to determine the accurate test results. Very ease maintenance due to simple mechanism of entire test assembly.

Specification

MODEL (K-EFVTA-01)
Model Rigid floor standing model
System status Digital
Sample size Enable to test up to 25 sample at a time
Tank S.S. 304 tank fitted at bottom of equipment of capacity around 250 liter
Filter 10 micron water filter inserted at the inlet of pump
Pressure source Pressure created through high pressure pump of reputed make
Working Pressure 0.50kg/cm² / Bar to 4.50kg/cm² / Bar
Accuracy ± 0.05kg/cm² / Bar
Pressure control Precision pressure control through throttle valve
Pressure Indicator Double display digital pressure indicator with In-built digital timer
Timer Range Up to 99.59 minute
Paint Powder coating
Power supply 230V AC, Single phase, 50Hz

Carbon Black Content Test Apparatus

CARBON BLACK CONTENT TESTER is widely used in plastic industry to check percentage of Carbon in Plastic material or finished products. Under the strict supervision of our well experienced Engineers Kant Plastology offers the innovative collection of CARBON BLACK CONTENT TESTER with adequate design of heater-thermocouple assembly and very smooth rise of heat with highly precise temperature control.The offered apparatus has minimum heat loss due to extra coating of heat insulation and its electrical components has also long life because its fitted at the bottom side of furnace.Our company procures all test related glassware accessories and chemicals to conduct the test with apparatus.

Specification

MODEL (K-CBC-01)
System status Digital
Heating Element 1000 Watts heating element wounded on ceramic tube
Temperature controller Micro processor based double display PID controller
Temperature Range Ambient to 800°C
Temperature least count 1°C
Accuracy ± 5°C or better
Effective Furnace size Ø30mm x 300mm Length
Pyrolyting chamber Heat resistant quartz glass tube
End Closures Silicon rubber corks with glass tubes to accept gas tubing
Pre treatment attachment De-oxygenating unit and de-humidifying unit
Gas flow control Through single stage regulator cum flow meter
Sample holder Quartz boat of Ø12mm & 75mm Length
Post treatment attachment Single dissolution unit
Timer Micro processor based double display digital timer available at optional
Timer range Up to 999.9 Seconds / Minutes
Insulation 100mm thick triple layer cera wool insulation
Accessories Quartz tube, quartz / ceramic boat, Gas washing bottle with M.S. fabricated Stand, Gas flow meter, Rubber tube, Desiccator with porcelain plate, Boat pulling rod and Chemicals to conduct test
Power supply 230V AC, Single phase, 50Hz

Carbon Black Dispersion Test Apparatus

CARBON BLACK DISPERSION TEST APPARATUS use to determine the uniform dispersion of carbon in plastic material free from white streaks and pits. Through our dexterous professionals and inventive workers Kant Plastology brings the exclusive range of CARBON BLACK DISPERSION TEST APPARATUS with very sleek and elegant look of microscope with higher accuracy of 20X magnification, Advancement in Illumination through white LED light for better prospective results. Artistic design of Hot plate with super heat control though blind regulator. Kant Plastology also provides Glass slides & S.S. Forcep to conduct the test.

Specification

MODEL (K-CBD-01)
Hot Plate Hot plate of Ø150mm with M.S.top to make thin film sample
Temp. Control Through blind regulator type thermostat
Microscope Projection microscope
Illumination White LED lamp with slots provided for natural cooling of illuminator
Magnification 10X & 20X
Microscope Screen 150mm diameter glass projection screen provided
Stage Detachable mechanical stage for X & Y cross movement with fully graduated scale
Power supply 230V AC, Single phase, 50Hz

Sheet Moulding Press

Kant Plastology is dedicatedly involved in offering wide array of SHEET MOULDING PRESS. The product is manufactured by using optimum grade raw material and latest technology at our state of art manufacturing unit. The rigid structure with elegant look is basic features of the floor mounting machine. The product has good temperature accuracy due to using of micro processor based double display digital PID controller.

Specification

MODEL (K-SMP-01)
System status Digital
Model Rigid floor standing model
Sample mould Rectangular spacer frame type mould to produce 100mm x 120mm x 4mm thick PE sheet other size available at optional
Platen type Twin plate type mould with heating & cooling systems
Heating system High efficient industrial flat heater in both heater plates
Temperature controller Micro processor based double display digital PID controller
Temperature range Ambient to 200°C
Working pressure Pressure up to 150kg/cm² / build-up through heavy duty 20 Ton hydraulic jack
Insulation Heat insulator inserted between heating & cooling plates
Paint Powder coating
Power supply 230V AC, Single phase, 50Hz