Category: Product

Oxygen Induction Time Tester
(Differential Thermal Analyzer Method)

Specification

Model K-OIT-01
Reference Standards IS. 4984 & ASTM D 3895
System Status The windows based software to interface the computer, Data entry through software, PC connectivity of RS – 232 and Graphical data type reports can be printed through software (The printout includes Party’s name, Address, File name, Date, Batch no., Operator name, Sample weight, Set temperature, Start time, Finish Time, Gas flow rate etc.)
Temperature Controller Microprocessor based PID temperature controller indicates the process temperature & Delta T
Range Ambient to 300°C
Resolution 0.1°C
Accuracy ± 0.5°C or better
Rate Of Temperature Rise 20°C/minute & 2°C/minute
Gas Flow Control Through gas regulator fitted on cylinder & Rotameters equipped with machine
Max. Test Time Range 0 to 300 minutes
Accessories Aluminium pan 200 nos. and Specimen holder
Temperature Calibration Indium & Tin material supplied for calibration of temperature
Cooling System Barrel cooling through circulated water circuit provided in machine
Paint Dual side Powder coated
Power Supply 230V AC, Single phase, 50 Hz

Blown Film Extrusion Plant

Specification

Model K-BFExP-01
Max. Output 6 to 8 kg / hour
Film Thickness Produce from 20 micron to 80 micron to evaluate the color dispersion
Extruder Standard fabricated heavy duty M.S. Structure with Aluminum section vertical support
Screw-barrel Screw – Ø25mm screw made from EN41B alloy steel with gas nitriding & chrome plating surface treatment
Barrel – Made from EN41B alloy steel with gas nitriding & divided in three heating zone for betterment of material blending process
Hopper S.S. 304 fabricated hopper with slide gate shut off, material dumping chute &. Side glass
Die Made from Nitro alloy steel equipped with Air ring & Blower
Power Supply 440V AC, 3 Phase, 50 Hz

‘V’ Notching Machine

Specification

Model K-VNC-01
Applicable For HDPE Pipe up to Ø400mm
Cutter Type Hardened tool having cutting angle of 60°
Cutting Ratio Available @ of 0.010 +/- 0.002 mm/rev/tooth
Notching Capacity Notching device able to notch the specimen depth up to 15mm vide width of 400mm
Movement Horizontal & vertical movement thorough Induction motor
Movement Measurement Through micro processor base digital indicator equipped on panel
Paint Powder coated
Power Supply 440v AC, 3 Phase, 50 Hz

Melt Flow Index Test Apparatus

Specification

Model K-MFI-01xi
Reference standards ASTM – 1238, IS – 2530
Test method A
System status Digital
Temperature controller Micro processor based double display digital PID controller
Temperature range Ambient to 300°C
Temperature resolution 0.1°C
Accuracy ± 0.1°C
Timer Micro processor based double display digital timer
Timer range Range from 0.1 minute to 999.59 minute
Time resolution 0.1 minute
Weight lifting system Manual
Sample cutting system Motorized cutter automatically operated at set Cut-off time
Accessories Orifice (Die), Piston, Orifice cleaner, Orifice ejector, Cylinder cleaner, Extrudate (sample) cutter, Forcep, Dead weights of 2.16 kgf & 5.00 kgf other weights are available at optional
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Melt Flow Index Test Apparatus

Kant Plastology feels abundantly pleased to offer a very sleek and compact design of MELT FLOW INDEX TESTER is rugged constructed machine with very precisely machined mechanical parts and accurate control on heating through PID temperature control. Custom made heaters equally distributed in barrel assembly for uniform heating. Kant Plastology procures all related mechanical accessories to conduct the test.

Specification

MODEL (K-MFI-01)
Reference standards ASTM – 1238, I.S. – 2530
Method A
System status Digital
Temperature controller Micro processor based double display digital PID controller
Temperature range Ambient to 300°C
Accuracy 0.1°C
Timer Micro processor based double display digital timer
Timer range Range from 0.1 minute/sec to 999.9 minute/sec.
Time resolution 0.1 minute/sec
Weight lifting system Manual
Sample cutting system Manual
Accessories Orifice (Die), Piston, Hopper, Orifice cleaner, Orifice ejector, Cylinder cleaner, Forcep, Dead weights of 2.16 kgf & 5.00 kgf other weights are available at optional
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Melt Flow Index Test Apparatus

Kant Plastology feels abundantly pleased to offer a very sleek and compact design of MELT FLOW INDEX TESTER is rugged constructed machine with very precisely machined mechanical parts and accurate control on heating through PID temperature control. Custom made heaters equally distributed in barrel assembly for uniform heating. Kant Plastology procures all related mechanical accessories to conduct the test.

Specification

MODEL (K-MFI-01-HMI)
Reference standards ASTM D – 1238, IS – 2530
Method A
Display 5.5″ LCD touch screen
Data Entry Through HMI unit
Temperature controller PLC based PID module temperature control device
Temperature range Ambient to 300°C
Temperature Resolution 0.1°C
Accuracy ± 0.2°C
Weigh Capacity Up to 60.00 gms
Weight lifting system Manual
Sample cutting Device Motorized cutter automatically operated at Set Cut-Off time
Specimen Weight Auto weighing device inserted to weigh the test sample after completion of auto-cutting operation
Result Test result with Average MFI value printed through Thermal Printer on ‘PRINT’ command
Accessories Orifice (Die), Piston, Hopper, Orifice cleaner, Orifice ejector, Cylinder cleaner, Forcep, Dead weights of 2.16 kgf & 5.00 kgf other weights are available at optional
Paint Powder coated
Power supply 230V AC, Single phase, 50Hz

Universal Testing Machine

With the state of art ergonomics Kant Plastology designed the UNIVERSAL TESTING MACHINE for test the general/engineering Plastic Materials, Plastics composites, Jumbo belts and other many more products. The machine is designed with very robust and rigid structure of double Column vertical movement on the mechanically treated low friction ball screws. The machine speed can vary through frequency controlled A.C. drive to perform various types of test for different type of products as per national and international standard. The machine function is very user friendly, operation ease and maintenance less. Kant Plastology provides the entire range in various customized options as per requirement.

Specification

MODEL (K-UTM-02LC/K-UTM-02LC-xi)
Available in test capacity 5000kgf/50kN & 10000kgf/100kN
System status Digital Model K-UTM-02LC Blue color four line LDC display indicated the value of Load, Extension, Testing speed & Type of test, machine operate through manual function only
Computer interface Model – K-UTM-02LC-Xi The windows based software to interface the computer, data entry through software, PC connectivity of RS-232 & graphical data type reports can be printed through software
Test jaws Vice type test jaws for tensile test are fitted on machine (Bending, Shearing, Compression & Modulus test jaws are available at optional)
No. of screws Double screw – nut (ball screw at optional) assembly mechanism driven through reputed make motor and gear box
Load cell Dual ‘S’ type loadcell of reputed make
Load cell unit kg/cm² / N / Mpa
Cross head travel 800mm
Displn. accuracy 0.1mm
Speed control Through frequency controlled A.C. drive
Speed Variable testing speed for 5mm/minute to 1000mm/minute
Power supply 440V AC, Three phase, 50Hz

Universal Testing Machine
(For Geomembrane fabric)

KANT PLASTOLOGY offering wide range of Universal testing machine for Tensile strength test, Ball burst test & Puncture test of Geo-membrane laminated fabric up to 1000micron thickness made from HDPE material. The machine is manufacturing from high grade steel material with advance metal treatment & passes through strict quality control process. The offered machines consists the features as Digitally control LCD display, which should interface with computer and generate the test data in form of tabular as well as graphical too. The crosshead movement should be varying through frequency controlled A.C. drive to perform various types of test. The machine’s function is very user friendly & operational ease.

Specification

MODEL (K-UTM-02LC/GmLF)
Applicable for Geo-membrane Laminated Fabric made from HDPE – utilize for waterproofing work as Canal & Pond lining as per I.S. 15351-2008
System status The windows based software to interface the computer, data entry through software, PC connectivity of RS-232 & graphical data type test reports can be printed through software
Test jaws The individual testing jaws provided for Tensile test, Tear test, Ball burst test & Puncture resistance test also
Software The windows based software (developed in Visual basic) to interface the computer
Data entry Through software
PC connectivity USB (through RS-232 to USB convertor of reputed make)
Reports & printouts Graphical data type reports can be printed through software
Load cell Dual Loadcell of ‘S Type’
Loadcell 1 Test range: 2000kgf with L/c. of 1kgf
Loadcell 2 Test range: 250kgf with L/c. of 0.1kgf
Load cell unit kg/cm² / N / Mpa
Cross head travel 800mm
Displn. accuracy 0.1mm
Speed 50mm/minute to 500mm/minute
Speed control Through frequency controlled A. C. Drive
Power supply 440V AC, Three phase, 50 Hz

Tensile Testing Machine

Kant Plastology offering a commendable range of Digital TENSILE TESTING MACHINE for determines themechanical strength of various products like Plastic Pipe, HDPE/PP Tape – Fabric, Plastics rope and many more plastics products. The machine is manufactured from high grade raw material with latest technology which is inspected properly by our highly professional engineers. The offered machines owing the feature like digitally control LCD display, precision load-cell with durable and sturdy structure of machine. Kant Plastology provide the entire range of TENSILE TESTING MACHINE with multitude of sizes, designs and other related customize specification and designs.

Specification

MODEL (K-TTM-01LC/K-TTM-01LC-xi)
Available in test capacity 250kgf / 2500N, 500kgf / 5kN, 1000kgf / 10kN
System status Digital model – K-TTM-01LC blue color four line LCD display indicated the value of load, extension, testing speed & type of test and machine operate through manual function only
Computer interface model – K-TTM-01LC-xi the windows based software to interface the computer, data entry through software, PC connectivity of RS – 232 & graphical data type reports can be printed through software
Test jaws Vice type test jaws for tensile test are fitted on machine
No. of screws Screw – nut (ball screw at optional) mechanism driven through reputed make motor & gearbox
Load cell ‘S Type’ loadcell of reputed make
Load cell unit kgf
Cross head travel 700mm
Extension accuracy 0.1mm
Speed Available Fixed speed of 100mm / minute or 300mm / minute Variable speed through frequency controlled A.C. drive available as optional
Power supply 440V AC, Three phase, 50Hz

Tensile Testing Machine

Kant Plastology offering a commendable range of Digital TENSILE TESTING MACHINE for determines the mechanical strength of various products like Plastic Pipe, HDPE/PP Tape – Fabric, Plastics rope and many more plastics products. The machine is manufactured from high grade raw material with latest technology which is inspected properly by our highly professional engineers. The offered machines owing the feature like digitally control LCD display, precision load-cell with durable and sturdy structure of machine. Kant Plastology provide the entire range of TENSILE TESTING MACHINE with multitude of sizes, designs and other related customize specification and designs.

Specification

MODEL (K-TTM-02LC/K-TTM-02LC-xi)
Available in test capacity Loadcell 1 – 500kgf / 5kN Loadcell 2 – 50kgf / 500N
System status Digital model – K-UTM-02LC Blue color four line LCD display indicated the value of Load, Extension, Testing speed & Type of test, machine operate through manual function only
Computer interface model – K-UTM-02LC-Xi The windows based software to interface the computer, data entry through software, PC connectivity of RS-232 & graphical data type test reports can be printed through software
Test jaws Dual set of vice type test jaws for tensile test are fitted on machine
No. of screws Single screw – nut (ball screw at optional) mechanism driven through reputed make motor & gearbox
Load cell Dual ‘S’ type loadcell of reputed make
Load cell unit kgf / N
Cross head travel 700mm
Extension accuracy 0.1mm
Speed Available fixed speed of 100mm / minute or 300mm / minute variable speed through frequency controlled A.C. drive available as optional
Power supply 440V AC, Three phase, 50Hz